Teilifís LED COB Uile-i-gCeann 
Taispeáin Solúbtha LED 
Taispeántais Trédhearcach LED 
Póstaer faoi stiúir 
Taispeántais LED Ciorclacha 
Taispeántais LED Cruthaitheacha & Saincheaptha A transparent LED film screen costs roughly US$740–2,220 in aghaidh an mhéadair chearnaigh for the film body (EXW Shenzhen), depending on pixel pitch — P10, the most common, lands around US$1,120/m². That figure covers the Scannán faoi stiúir itself, not the controller, cables, install, or shipping, which typically add another 10–25%. This guide breaks the number down by pitch and project size so you can budget before you request a quote.
- Film body runs US$740–2,220/m² depending on pixel pitch. P10 — the most widely used — is roughly US$1,120/m² (EXW Shenzhen, standard 2000-nit configuration).
- Pitch is the biggest price lever. Finer pitch (P5) costs more per m² but is only worth it if viewers stand within 2–4 metres. Coarser pitch (P15–P20) drops the unit cost sharply for far-viewed façades.
- The m² price is not the total budget. Controller, cables, install labour, and shipping typically add 10–25% on top of the screen body.
- Film is indoor-rated (IP31). It is not waterproof and not the tool for weather-exposed façades — that is Transparent Grid’s IP65 job.
- You get a line-item quote, not a price-list number. Exact cost depends on glass size, pitch, brightness, and quantity — send those three details and an engineer returns a BOM within 24 hours.
An Freagra Macánta Ar dtús
A transparent LED film screen costs US$740 to 2,220 per square metre for the film body (EXW Shenzhen). The range is wide because it is driven by one variable above all others: páirc picteilín — the distance between LED dots, written as P5, P10, P20, and so on. Smaller pitch means denser LEDs, a sharper image, and a higher price per square metre.
The number you see on a datasheet is the screen body only. It does not include the LED controller, power and signal cabling, installation labour, or shipping and import duty. In most projects those add 10-25% on top. Budget on the total, not the m² headline.
LED film is cut to your exact glass and quoted per project. Glass size, pitch, brightness, whether the panels are curved or custom-cut, and order quantity each move the number more than a single “$/m²” headline would suggest. A fixed published price would be wrong for at least half the projects we quote. The ranges below are the honest reference — the line-item BOM you receive within 24 hours is the real number.
Price by Pixel Pitch
DOIT VISION’s LED Film comes in six pitches, from P5 to P20. Use the viewing distance to pick the pitch, then read the reference EXW price for that row. USD figures converted from the 2026 sales price list at USD/RMB 7.25.
| Pic picteilíní | Reference Price (USD/m²) | Ag féachaint ar Fad | Fearr Do |
|---|---|---|---|
| P5 | ~ 2,220 | 2-4 m | Close-view premium retail, logos, fine text |
| P6.25 | ~ 1,570 | 3-5 m | Storefronts with moderate foot-traffic distance |
| P8 | ~ 1,330 | 4-8 m | Mall windows, larger glass walls |
| P10 (Is Coitianta) | ~ 1,120 | 5-10 m | The best transparency / resolution / cost balance |
| P15 | ~ 880 | > 10 m | Building façades seen from across a street |
| P20 | ~ 740 | > 15 m | Very large, far-viewed glass walls |
The rule of thumb is simple: pitch in millimetres ≈ minimum viewing distance in metres. If your viewers stand 6 metres back, P10 or P8 is fine — paying for P5 buys sharpness nobody can see from that distance. That one choice can swing the budget by 30–40%.
Full per-model specifications — brightness, pixel density, panel size — are on the Leathanach táirge Scannán LED.
Cad a Thiomáineann an Praghas i ndáiríre
Four things move the number, in rough order of impact:
- Páirc picteilín. The single biggest lever. Going from P5 to P10 can cut the per-m² cost by roughly half, because the panel carries far fewer LEDs per square metre.
- Limistéar scáileáin. Film is priced per square metre, so cost scales near-linearly with area — but larger orders often unlock a better unit rate. MOQ on DOIT VISION film is aon íosmhéid, so small trial orders are possible.
- Saincheapadh. Custom-cut panels, curved glass, and non-standard shapes add engineering time and lead time. Standard rectangular runs are the cheapest path.
- Brightness and configuration. The film spans 2,000–4,000 nits (P5 around 2,500). Higher brightness and upgraded controllers raise the BOM, but for interior glass the standard configuration is usually correct.
None of these are hidden surprises — a line-item BOM lists each one, so you can see exactly where the money goes before you commit.
Estimate Your Project Cost
Budgeting is a three-step sum. Worked example included.
Screen area (m²) = width (m) × height (m). A 6m × 3m window is 18 m².
Match pitch to viewing distance, then take that row’s price range from the table above.
Screen cost = area × price/m². Then add 10–25% for controller, cables, install, and shipping.
A 10m × 3m wall is 30 m² at P8 (~US$1,330/m²). The film body runs US $ 39,900. Adding controller, cables, install, and shipping brings the total to roughly US$44,000–50,000. The exact figure depends on destination, duty, and site conditions — confirmed in your line-item quote.
Na Costais Fholaithe (Lasmuigh den Scáileán)
The film body is the largest line item, but not the only one. Budget for these before you compare quotes, otherwise two suppliers’ “per m²” prices are not comparable:
| Mír | Raon tipiciúil | nótaí |
|---|---|---|
| Rialaitheoir LED (Novastar / Colorlight) | US $ 300 - 600 | Cumraithe de réir leagan amach do phainéil roimh an loingsiú |
| Cáblaí cumhachta agus comhartha | US $ 200 - 500 | Braitheann sé ar fhad an rith agus ar leagan amach an tsuímh |
| Saothar suiteála | De réir réigiúin | Film needs no steel frame — install is fast and low-cost |
| Loingseoireacht & dleacht allmhairithe | De réir ceann scríbe | Luaite chuig do chalafort |
The good news: because film is a self-adhesive sheet with no frame and no structural steel, install cost is lower than any framed transparent screen. A two-person crew installs roughly 20–30 m² per day, and the film adds almost no load to the glass.
Film vs Other Transparent Routes
If you are shopping “transparent LED” broadly, know that Film is one of three constructions — and they are not three price tiers of the same screen. At equal area, cost runs Scannán → Holografach → Eangach, because each step adds a structural layer:
Self-adhesive sheet, no frame. 90–95% transparency by model, P5–P20, IP31 indoor. Cheapest structural cost — the retrofit route for existing glass.
Aluminum frame + LED strips. 70–90% transparency, P2.5–P6.25, floating 3D image. Finer pitch, adds a frame.
Modular aluminum cabinets. 40–80% transparency, up to 5,000 nits, IP65 outdoor option. The structural and daylight route.
For the full side-by-side on transparency, brightness, pitch, and where each one belongs, read our Comparáid Scannán vs Holografach vs Eangach, nó tosú ón Leathanach catagóire LED trédhearcach. Want all three routes’ prices in one table? See the transparent LED display price guide.
Full Specifications (All Six Models)
Specs below come from the DOIT VISION product datasheet — not marketing labels. All six pitches share the same construction, front service, and control systems.
| Tréith | luach |
|---|---|
| Páirc picteilín | P5 / P6.25 / P8 / P10 / P15 / P20 |
| Dlús picteilín | 40,000 (P5) to 2,500 (P20) dots/m² |
| Trédhearcacht | 90% (P5) – 95% (P20) by model |
| gile | 2,000–4,000 nits (P5 thart ar 2,500) |
| Tiús/meáchan | 2.5 mm · 1.3 kg per panel |
| Ábhar painéil | Flexible PET + integrated LED circuit |
| Panel widths | 250 / 500 / 750 / 1000 mm (P15: 390×990 & 250×1000) |
| Refresh rate / grayscale | 3,840 Hz · 16 bit |
| Ag féachaint ar uillinn | 160°A / 160°V |
| Rátáil IP | IP31 (istigh) |
| Cumhacht | Max 600 W/m² · Avg 200 W/m² |
| Córas rialaithe | Novastar / Colorlight |
| Ionchuir comhartha | HDMI / DVI / VGA |
| Saolré | uaireanta 100,000 |
| Deimhniúcháin | CE, FCC, CB, RoHS |
| bharántas | blianta 2 |
| MOQ | Gan íosmhéid |
Request the full PDF datasheet, cut-list template, and power calculations: [ríomhphost faoi chosaint].
Cost-Saving Tips (And the Traps to Avoid)
- Do not over-buy pitch. If viewers stand 6–8 metres back, P10 renders as sharp as P6.25 does up close — and costs 30–40% less per m². Match pitch to viewing distance, not to a spec sheet.
- Use the film’s structural advantage. No steel frame, no glass replacement, no building permit in most retrofit cases. That is where film beats every framed screen on total installed cost.
- Keep it indoor. Film is IP31. If the glass faces weather, you either mount film on the interior face (glass acts as the weather barrier) or switch to Transparent Grid’s IP65 outdoor option — do not “weatherproof” film on-site.
- Standard rectangles ship fastest. Custom-cut panels and curved shapes add engineering time and lead time. Order the standard widths where the design allows.
- Compare total cost, not m² price. A lower per-m² quote can still cost more once controller, cables, and duty are added. Ask every supplier for the same line-item breakdown.
For most commercial projects the transparent LED film budget lands here: small retail windows (10–15 m²) around US$12,000–21,000; medium glass walls (20–30 m²) around US$25,000–42,000; large façades (over 50 m²) quoted per project — film body at P10 (~US$1,120/m²) plus 10–25% for controller, cables, install, and shipping. Pick the pitch by viewing distance and get a line-item BOM before you commit.
Send three details — the glass dimensions, how close viewers stand, and the quantity — and an engineer returns a line-item quote within 24 hours. No obligation, no price-list runaround.
