Cineálacha scáileáin sféaracha LED: sféar iomlán nó leathsféar?

Compare the three display forms

An sphere and hemisphere product range provides the configuration route. Shape describes the display surface; hanging, floor mounting and architectural integration describe how that surface is installed.

If the desired form is shallower than a half-sphere, specify its opening and depth. Calling every curved segment a hemisphere can hide a significant difference in the required LED layout and frame.

Choose from the audience route

Choose a full sphere when the globe itself is the visual feature and visitors encounter it from multiple directions. Decide where key messages should appear as people move; an image visible from one position does not make every part of the sphere visible at once.

Consider an outward hemisphere when the architecture provides one main approach and a complete rear display surface would serve little purpose. Consider an inward hemisphere when the image should occupy a concave zone that the audience looks into.

For the half-sphere options, the hemisphere planning guide covers opening dimensions, depth and viewing side in more detail.

Treat mounting and maintenance as a separate choice

A suspended display needs an agreed support and handling design. A floor-mounted assembly needs a suitable base, clearances and cable routes. An integrated wall or ceiling design needs access for assembly and maintenance after the surrounding finishes are complete.

Ask for the proposed assembly envelope and supporting connections. Plan the delivery route around actual package dimensions and weights. The visible sphere diameter alone cannot establish whether the assembled unit fits a doorway or how it should be lifted.

Select the configuration for the environment

Indoor or outdoor use is another configuration decision, separate from full sphere or hemisphere geometry. State exposure, ambient light, operating conditions and maintenance access. Confirm the proposed hardware for that environment rather than treating a display shape as proof of suitability.

Then choose diameter and pitch around the viewing positions and content detail. The sphere size guide lists confirmed full-sphere diameter and pitch combinations; a custom segment requires its own geometry review.

Prepare the shape and configuration request

Send a site photograph or drawing with the audience route, approximate size, viewing side and proposed mounting position. Add the environment, sample content and delivery destination. If two shapes remain possible, describe the intended experience so they can be compared against the same requirements.

The complete display includes the control system. Other equipment, accessories and services are determined by the project configuration and formal quotation. Request a sphere or hemisphere proposal with the selected form or the two options you want to compare.

Topic

Cineálacha scáileáin sféaracha LED: sféar iomlán nó leathsféar?

Bealach táirge

Cumraíochtaí taispeána LED DOIT VISION lánsféar agus leathsféar.

Rialú

Mooncell; leanann sonraí crua-earraí agus athsheinm chumraíocht an tionscadail.

Ionchuir phleanála

The first choice is where the audience stands relative to the image. A full sphere presents a globe from multiple sides; an outward hemisphere presents a convex surface; an inward hemisphere creates a concave viewing zone. Mounting and indoor or outdoor use are separate configuration decisions.

Raon feidhme luachana

Áirítear an córas rialaithe sa taispeántas iomlán. Leanann trealamh, gabhálais agus seirbhísí eile cumraíocht an tionscadail agus an luachan foirmiúil.